The SimpliSafe Keypad uses 3M Command Strip Adhesive Tape to adhere to a flat surface. Removing the keypad when using the adhesive strips should be done very slowly and it’s unlikely that you can reuse the adhesive strips. Make sure this is where you really want it. There are a few challenges that are worth mentioning.įirst is the importance of final placement selection. SimpliSafe Entry Sensor Installation Challenges There are four mounting holes on the back of the mounting plate that can be used.Īll done. However, remember, unlike the 3M strips, you will put holes in the wall. I find the included adhesive strips do not stick as well to flat versus glossy paint. The SimpliSafe Keypad also includes a set of mounting screws that can be optionally used. After the time has passed, reattach the keypad. I would then let it sit without the keypad for at least 30 minutes. Once you get it straight, press firmly on all four areas where the tape appears. It’s worth the extra minute to use the level. The keypad is on the large side so if it’s mounted on a slight angle, you will likely notice it. Peel off the wax backing to the strips, then line up the mounting plate. From personal experience, I can confirm that. Nice part about this tape is that according to 3M, it’s made to stick to walls and can be removed without damage. Note the presence of four 3M Command Strips. I find it easier to work with when the keypad is not attached. Separate the mounting bracket from the keypad by pulling it off the back. Here’s how to do that.Ī SimpliSafe Keypad has two parts. Most will opt to mount the SimpliSafe Keypad. This comes in handy when setting up new devices or perhaps would like to take it with you from room to room. Since it’s battery operated, the keypad is fully portable. Technically, the SimpliSafe Keypad does not need to be mounted. We will also cover topics such as mounting the SimpliSafe SimpliCam and SimpliSafe entry sensors. This is one of a series of articles on mounting SimpliSafe components. In fact, you don’t even have to mount it. SimpliSafe is incredibly flexible when it comes to mounting the components.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |